PMHJ – 400 plane truss

Steel bar straightening mechanism: the main bar and the belly bar are welded after the plate material is straightened by the straightening mechanism, with a high degree of automation and high production efficiency.
Welding machine: self-developed welding cylinder, welding speed, thereby improving the overall welding production line production speed.
Cutting mechanism: automatic cutting according to the length of the required mesh.
Belly bar bending mechanism: the upper bending teeth and the lower bending teeth are driven by the servo motor to achieve continuous bending of the belly bar, which greatly improves the production efficiency.
The whole adopts man-machine interface +PLC programming controller control, high degree of automation.

Main technical parameters

name	argument	name	argument
Supply voltage	380V	Cooling water temperature	30 ℃ or less
Rated frequency	50Hz	Truss height	50-400mm
Load duration	20%	Crest spacing	180-600mm
Rated input power of welding machine	2×100KVA	Diameter of ventral bar	4-8mm(round steel)
Barometric pressure	0.6 ~ 0.8 Mpa	Diameter of main bar	6-12mm
Cooling water pressure	0.3 MPa	Maximum welding speed	14m/min
Cooling water flow	40L/min	Overall dimensions of equipment	32 m * 2.6 m * 3.2 m

Name *

Email *

Tel *

Product

Selecotr Country *

Message Content