Feature
- Cross wire straightening and blanking mechanism:cross wire are sent to the blanking mechanism after the coils are straightened by straightening mechanism,with high degree of automation
- The device is designed with HMI and controlled by PLC programming,with high degree of automation
- This welder can be used to weld many materials with wide adaptability.such as hot-rolled ribbed bar,cold-rolled ribbed bar,hot-rolled plain bar,cold-rolled plain bar etc.
It can be welded in one time or time-based according to the power supply capacity of customers - Welding systems,such as transformer,upper and lower electrodes of SCR and so on,are forced water cooling and equipped with a flow protection device so that the machine can works reliably and continuously
- The pressure of pneumatic welding system is Stepless adjustment,which can fast response any change of steel bar specifications
- Welding pressure is uniform to ensure the quality of all welding spots
The line wire and wire are made after the coils are straightened straightening mechanism,additional straightening devices are no required - A special lifting mechanism is designed.It can break away from the electrode during dragging wire meshes to ensure the lifetime of electrode and reduce the operation expense
- Cross wire blanking device adopts a stepping motor for automatic feeding,which can relieve the labor intensity and improve efficiency
mported digital servo motor system ensures the accuracy of mesh size - Longitudinal mesh size can be changed by screen input to adapt to any changes of multi-specification engineering meshes
- A magnetic swinging mechanism is designed for blanking position of cross wire,which brings fast blanking speed and high production efficiency
- An in-place device is equipped at the electrode to ensure the reliable and accurate blanking of cross wire
- The unique design is favorable to replace steel bars and steel meshes conveniently,flexibly and fast
| Name | Parameter |
|---|---|
| Voltage Frequency | 380V,50Hz |
| Number of Phases | Three phase-four wire |
| Load Duration Rate | 20% |
| Air Source Pressure | ≥0.7MPa |
| Cooling Liquid Temperature | ≤30℃ |
| Cooling Liquid Flow | <40L/min |
| Max.Welding Capacity | Φ6mm+Φ8mm |
| Line Wire Spacing | 50mm (increments 50) |
| Cross Wire Spacing | 225mm (stepless adjustment) |
| Diameter of Rebar | Φ4-8 mm for line wire; Φ4-6 mm for cross wire |
| Feeding Method | Line wire-coil:cross wire-coil |
| Max.Welding Velocity | 100rows/min(spacing 50mm) |
| Production Capacity | 40m3100x600x3300mm |
| Rated Power | 2x150kVA |
