Feature
- High production efficiency.Two meshes can be welded simultaneously
- The device is designed with HMI and controlled by PLC programming,with high degree of automation
- This machine can be used to weld many materials with wide adaptability,such as hot-rolled ribbed bar,cold-rolled ribbed bar, hot-rolled plain bar,cold-rolled plain bar etc.
- It can be welded in one time or time-based according to the power supply capacity of customers
- The machine set is designed with a separable structure for easy specification adjustment and maintenance
- Welding systems,such as transformer,upper and lower electrodes of SCR and so on,are forced water cooling and equipped with a flow protection device so that the machine can works reliably and continuously
- The pressure of pneumatic welding system is Stepless adjustment,which can fast response any change of steel bar specifications
- Welding pressure is uniform to ensure the quality of all welding spots
- The cross wire are straightened by round coils through straightening mechanism,additional straightening devices are no required
- A special lifting mechanism is designed.It can break away from the electrode during dragging wire meshes to ensure the lifeti me of electrode and reduce the operation expense
- Imported digital servo motor system ensures the accuracy of mesh size
- Longitudinal mesh size can be changed by screen input to adapt to any changes of multi-specification engineering meshes
- A magnetic swinging mechanism is designed for blanking position of cross wire,which brings fast blanking speed and high production efficiency
- An in-place device is equipped at the electrode to ensure the reliable and accurate blanking of cross wire
- The unique design is favorable to replace steel bars and steel meshes conveniently,flexibly and fast
| Name | Parameter |
|---|---|
| Voltage Frequency | 380V.50Hz |
| Number of Phases | Three phase-four wire |
| Load Duration Rate | 20% |
| Air Source Pressure | 0.6-0.8MPa |
| Cooling Liquid Flow | 50-80L/min |
| Cooling Liquid Temperature | ≤30℃ |
| Max.Welding Capacity | Φ6mm+Φ8mm |
| Line Wire Spacing | 50mm (increments 50) |
| Cross Wire Spacing | 225mm (stepless adjustment) |
| Diameter of Rebar | Φ6-8mm(Φ4-8 mm for line wire/Φ4-6 mm for cross wire) |
| Feeding Method | Coil |
| Unloading/Output Method | By unloading machine |
| Max.Welding Velocity | 95rows/min(spacing 50mm) |
| Rated Power | 4x150kVA |
