Feature
- High production efficiency.Two meshes can be welded simultaneously
- The device is designed with HMI and controlled by PLC programming,with high degree of automation
- It can be used to weld many materials with wide adaptability,such as hot-rolled ribbed bar,cold-rolled ribbed bar,hot-rolled plain bar,cold-rolled plain bar etc.
- It can be welded in one time or time-based according to the power supply capacity of customers
- The machine set is designed with a separable structure for easy specification adjustment and maintenance
- Welding systems,such as transformer,upper and lower electrodes of SCR and so on,are forced water cooling and equipped with a flow protection device so that the machine can works reliably and continuously
- The pressure of pneumatic welding system is Stepless adjustment,which can fast response any change of steel bar specifications
- A special lifting mechanism is designed.It can break away from the electrode during dragging wire meshes to ensure the lifetime of electrode and reduce the operation expense
- Welding pressure is uniform to ensure the quality of all welding spots
- Cross wire blanking device adopts a stepping motor for automatic feeding,which can relieve the labor intensity and improve efficiency
- Imported digital servo motor system ensures the accuracy of mesh size
- Longitudinal mesh size can be changed by screen input to adapt to changes of multi-specification engineering meshes
- A magnetic swinging mechanism is designed for blanking position of cross wire,which brings fast blanking speed and high production
efficiency - An in-place device is equipped at the electrode to ensure the reliable and accurate blanking of cross wire.
- The unique design is favorable to replace steel bars and steel meshes conveniently,flexibly and fast
| Maximum welding speed | 100 rows/min (spacing 50mm) |
| Maximum solder joint width | 450mm |
| Spacing of longitudinal bars | 50mm,(adjusted by a factor of 50) |
| Interbar spacing | Stepless adjustable over 25mm |
| Diameter of longitudinal bar | 4-6mm |
| Diameter of transverse bar | 4-6mm |
| Maximum welding capacity | Diameter 6mm+6mm |
| Welding material | Ribbed bar, round steel surface without rust, no lime drawing agent |
| Feeding mode of longitudinal bar | preform |
| Feed mode of transverse bar | Plate material or straighten pre-cut material |
| Transformer power | 4X150KVA |
| Load duration | 20% |
| Supply voltage | 380V |
| Source pressure | 0.6-0.8 Mpa |
| Cooling water pressure | 0.3Mpa |
